Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: shilmover on December 31, 2007, 01:07:18 am

Title: WTB: Nintendo Sanyo Vertical Mounting Hardware
Post by: shilmover on December 31, 2007, 01:07:18 am

Anyone have a set that they are not using?  I did make one, but I am not happy with it.

Title: Re: WTB: Nintendo Sanyo Vertical Mounting Hardware
Post by: pcb on January 02, 2008, 11:17:05 pm

We have reproduction mounts at www.mikesarcade.com

Best,

 - Mike -

Title: Re: WTB: Nintendo Sanyo Vertical Mounting Hardware
Post by: shilmover on January 02, 2008, 11:23:09 pm

Mike,

I know, but I have a hard time spending $50 plus shipping when I paid $100 for the cab.  :)  Nothing against what you are charging, its just a bit much for me. 

I am hoping someone has one for cheaper.

B

Title: Re: WTB: Nintendo Sanyo Vertical Mounting Hardware
Post by: pcb on January 04, 2008, 01:56:32 pm

Understood.  What I used to do is get a piece of angle iron for the bottom mount, bend a couple of 'L' brackets and use a 1" square tube all from home depot to do the same thing.  You can get away for around $20 that way.

Best,

 - Mike -

Title: Re: WTB: Nintendo Sanyo Vertical Mounting Hardware
Post by: shilmover on January 04, 2008, 02:10:36 pm

Quote from: pcb on January 04, 2008, 01:56:32 pm

Understood.  What I used to do is get a piece of angle iron for the bottom mount, bend a couple of 'L' brackets and use a 1" square tube all from home depot to do the same thing.  You can get away for around $20 that way.

Best,

 - Mike -

Thanks.  I will try that.

B