Build Your Own Arcade Controls Forum

Main => Software Forum => Topic started by: Xb0x3r on December 19, 2007, 10:03:21 pm

Title: Daphne (Laserdisc) Set-Up
Post by: Xb0x3r on December 19, 2007, 10:03:21 pm

How do I set up Daphne so it can:

1. Work with MAMEWAH

2. Work with downloaded ROMs.

Thanks,
Xb0x3r

Title: Re: Daphne (Laserdisc) Set-Up
Post by: Xb0x3r on December 21, 2007, 10:56:08 am

Can someone please tell me?

Title: Re: Daphne (Laserdisc) Set-Up
Post by: polaris on December 21, 2007, 11:21:38 am

from what i understand the roms are only part of the issue, you still need dvds or laserdiscs of the game.
As it is possible , i believe the daphne guys prefer it if people buy a dvd from digital leisure, which can help set up daphne for you rather than any spurious source for the games.

Title: Re: Daphne (Laserdisc) Set-Up
Post by: unclet on December 21, 2007, 04:09:36 pm

It has been a while, but I think you need the Daphne emulator, ROM files, frame files, movie files (ex: OOG, M2V, and/or DAT) for each game.

Once you have all this stuff you can then try reading these threads to get ideas what people have done for MameWah:

http://www.mameworld.info/ubbthreads/showthreaded.php?Cat=&Number=124115&page=&view=&sb=5&o=&fpart=1&vc=1

http://www.mameworld.info/ubbthreads/showthreaded.php?Cat=&Number=107756&page=&view=&sb=5&o=&fpart=1&vc=1


OR

If you care to use MALA you can read my HowTo document on how I set up Daphne.    I believe the information is similar between Mala and MameWah but you just need to use the MameWah specific syntax inside the config files instead.


Anyway, best I can do for you .....  good luck

Title: Re: Daphne (Laserdisc) Set-Up
Post by: Howard_Casto on December 22, 2007, 04:19:50 pm

Daphne is fairly turn-key at this point.... assuming you have the dvds.