Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: notreallyamoron on November 15, 2007, 12:09:20 pm

Title: replacing/adapting NEC data monitor to centipede arcade game.
Post by: notreallyamoron on November 15, 2007, 12:09:20 pm

I have a Centipede arcade game with a bad monitor.  I have removed the monitor and was wondering if there is a cable or adaptor to input the video to an NEC 19" data monitor.  The monitor has VTR inputs as well as RGB multi inputs.  Thanks in advance for any help.

Title: Re: replacing/adapting NEC data monitor to centipede arcade game.
Post by: grantspain on November 15, 2007, 12:50:16 pm

it should work with the rgb inputs but a picture of the input plugs would help

Title: Re: replacing/adapting NEC data monitor to centipede arcade game.
Post by: notreallyamoron on November 15, 2007, 02:59:17 pm

Here's a pic of the inputs.  The VTR is on the left with the RGB next to it.

Title: Re: replacing/adapting NEC data monitor to centipede arcade game.
Post by: grantspain on November 15, 2007, 03:10:08 pm

you are gonna need to do some searching for the pinouts i'm afraid