Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: superbigjay on November 10, 2007, 03:50:46 pm

Title: How to turn on all LED connected to a ledwiz
Post by: superbigjay on November 10, 2007, 03:50:46 pm

All right, I admit it!
I'm a lazy <....>


I'm having a party in about an hour and just manage to get my cab functional.
I'm in a rush right now (clean up the mess I did working overnight on the cab) before the relatives get here...

I have a ledwiz connected, but didn't setup anything yet for it, So all the Leds are OFF.

I'd like to turn ON all the LED.

what would be the easiest way to do this?

PS: I'm using Mala as the frontend, but I guess this isn't required to simple turn the led on...

Jay

Jay  :cheers:

Title: Re: How to turn on all LED connected to a ledwiz
Post by: csa3d on November 10, 2007, 04:25:03 pm

there's an .exe from ggg site, which you can force the testing of leds on and off.  Check their site.  Good luck!
-csa

Title: Re: How to turn on all LED connected to a ledwiz
Post by: fjl on November 10, 2007, 05:52:45 pm

I believe that LED wiz plugin for mala turns on all the LED's when you first run it. Need to install the plugin though.

Title: Re: How to turn on all LED connected to a ledwiz
Post by: loadman on November 10, 2007, 08:52:34 pm

don't forget about this:

http://forum.arcadecontrols.com/index.php?topic=70516.msg723625#msg723625 (http://forum.arcadecontrols.com/index.php?topic=70516.msg723625#msg723625)

Title: Re: How to turn on all LED connected to a ledwiz
Post by: superbigjay on November 11, 2007, 10:07:47 pm

Thanks everyone,

I ended up being short on time...
So when the relatives got here, I didn't had time to setup the ledwiz...

But the were impressed anyways  :)

Jay

Title: Re: How to turn on all LED connected to a ledwiz
Post by: bfauska on November 11, 2007, 10:40:55 pm

It's OK.  It just means that they'll be more again when they see it with lights next time.