Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: hevnsnt on May 08, 2003, 01:53:51 pm

Title: Not sure if this is going to fly.... I want to *BORROW* a slot cutter bit
Post by: hevnsnt on May 08, 2003, 01:53:51 pm

 ;D ;D

Ok, so I am fairly new around here, but I am a good guy, and I am hoping that someone will hook me up here.  I need a slot cutting bit for my control panel only.  Everything else is already cut, and I would prefer not to buy a bit just for this little cut.  Would anyone *LOAN* me their slot cutting bit?  I will of course pay for shipping, etc..

If this sounds like something that you might think about, please email me at hevnsnt@i-hacked.com and I can give you all my info (including home/cell number so you can verify I am legit)

I will only need it for 1-2 nights, and then priority mail it back to you.

Thanks for your time and your help!

-Bill

Title: Re:Not sure if this is going to fly.... I want to *BORROW* a slot cutter bit
Post by: CitznFish on May 08, 2003, 05:37:43 pm

shipping to you, plus priority mail back would cost just as little less than the 12 dollar slot cutting bit.   Spend the extra buck.

Title: Re:Not sure if this is going to fly.... I want to *BORROW* a slot cutter bit
Post by: hevnsnt on May 08, 2003, 05:59:13 pm

I thought they were $30+ ??

Where do I get it for 12?

Title: Re:Not sure if this is going to fly.... I want to *BORROW* a slot cutter bit
Post by: Homebrew on May 08, 2003, 07:38:04 pm

You can get one from MLCS for $16.  They have free ground shipping as well.  
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_slot.html#Anchor%20slotct3w (http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_slot.html#Anchor%20slotct3w)
Look for the 1/16" 3 wing slot cutter.  

-Kevin

Title: Re:Not sure if this is going to fly.... I want to *BORROW* a slot cutter bit
Post by: dirt on May 08, 2003, 07:40:36 pm

here is a place http://www.coastaltool.com/cgi-bin/SoftCart.exe/a/ab/aman/slotting.htm?L+coastest+dkxv1470ff213621#cart


dirt

Title: Re:Not sure if this is going to fly.... I want to *BORROW* a slot cutter bit
Post by: Chris on May 09, 2003, 12:22:39 am

Anyone know where to find one of these with a 1/8" shank?  I don't have a router, but I have a router kit for my Dremel... but the smallest slot bit they make for it is for a 1/8" slot, which is too big for T-molding, I believe...

--Chris

Title: Re:Not sure if this is going to fly.... I want to *BORROW* a slot cutter bit
Post by: AceTKK on May 09, 2003, 04:29:07 am

for a dremel, try using this bit.  I've heard it works well:

http://www.walmart.com/catalog/product.gsp?cat=51199&dept=5428&product_id=1215240&path=0%3A5428%3A51199%3A4093%3A55338%3A55341

-Ace-

Title: Re:Not sure if this is going to fly.... I want to *BORROW* a slot cutter bit
Post by: Chris on May 09, 2003, 09:31:18 am

Quote from: AceTKK on May 09, 2003, 04:29:07 am

for a dremel, try using this bit.  I've heard it works well:

Wow, that looks frightening... like some sort of medieval torture device!  :o


--Chris