Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: FrizzleFried on November 05, 2007, 05:25:28 pm
-
Does anyone have any info on the Sharp Image SI-320Z (the z has a line through it) chassis? I got it in a Mr. Do cabinet I picked up for $50. The guy said it didn't work. The thing looks BRAND NEW. Are Sharp Image or just SHARP chassis also replacements for Nintendo cabs? I don't want to just fire it up if it possibly could be a 100v chassis?
Here are some photos.
It closely matches the UNIDENTIFIED Sharp Image photo on Bob Roberts site, but it is gray instead of brown. I already emailed Bob Roberts.
(http://i197.photobucket.com/albums/aa111/PapaFriz/SI320-1.jpg)
(http://i197.photobucket.com/albums/aa111/PapaFriz/SI320-2.jpg)
-
Fired the monitor up... all i get is an out of sync blue screen. The harness in this Mr. Do is jacked up though so I am going to re-wire. I also will likely drop a known working G07 in to determine if it's wiring or chassis related.
Bob Roberts replied that the chassis looks like a WG K7000 knock-off of some sort.
-
Fired the monitor up... all i get is an out of sync blue screen.
Does the Mr. Do board play blind though?
Bob Roberts replied that the chassis looks like a WG K7000 knock-off of some sort.
That multi-legged IC on the heatsink with the big cap behind it in the top right hand corner of your fist pic does kinda remind me of a K7000 chassis. Odd.
-
Fired the monitor up... all i get is an out of sync blue screen.
Does the Mr. Do board play blind though?
Bob Roberts replied that the chassis looks like a WG K7000 knock-off of some sort.
That multi-legged IC on the heatsink with the big cap behind it in the top right hand corner of your fist pic does kinda remind me of a K7000 chassis. Odd.
Yes...it plays blind...sorta. You can hear it as normal, but then the "YOU ARE ALMOST DEAD" music comes on real fast (the faster music)...after like 3 seconds of play...
...and the controls don't seem to work....I can't hear me throw a ball...or movement sounds....