Build Your Own Arcade Controls Forum
Main => Software Forum => Topic started by: the_jasomeister on November 01, 2007, 03:47:51 am
-
ok I'm making a mame cabniet and having troubles with my computer.
its a 2.8Ghz prosessor with onboard graphics and 512 ram and i just installed xp on it last night and when i tryed to play the lastest mame even pacman was running at about 80%.
THIS SHOULD NOT BE HAPPENING SOMEBODY HELP PLEASE =(
I narrowed it down to a few choices that could be the problem, can you guy use your expertese to help me?
- The onboard graphics card uses to much prosessor power and slows it?
- Lack of sp2 makes it slow?
- Drivers need updating?
- Some unknown setting in mame makes it use to much cycles?
Can you please help because I don't want to but a new video card if its not the problem.
-
I just tried Pacman on Mame .120 on a 3.2 Ghz P4 that has onboard video and it ran 100% no problem. Have you monkeyed with the mame.ini file any? Is your computer running slowly with other apps? Why don't you try a pre-video-rewrite version of Mame and see what you get? Say Mame version .105 or less.
-
thanks for the help but last night i figured the only difference waws the graphics card so i took the one from my computer and put it in it and it works fine. now i just need a better one for my comp =(
-
thanks for the help but last night i figured the only difference waws the graphics card so i took the one from my computer and put it in it and it works fine. now i just need a better one for my comp =(
Dragnit has some misc cards in B/S/T (http://forum.arcadecontrols.com/index.php?topic=72493.msg747349#msg747349)
-
also if your onboard is 64mb it takes 64MB away from your ram when onboard is used