The NEW Build Your Own Arcade Controls

Main => Project Announcements => Topic started by: D4RKSL4Y3R on October 22, 2007, 07:33:39 am

Title: noob here starting 1st project, need some help!
Post by: D4RKSL4Y3R on October 22, 2007, 07:33:39 am

hi all, this is my first post. atm i am in the middle of making arcade controls out of my xbox 360 controller so i can be used on MAME and xbox 360. i have just finished the woodwork for the box.

the compents i am using:
SANWA JOYSTICK JLF-TP-8YT
8 sanwa OBSN-30 buttons
2 happ ultimate push buttons 24mm
one green halo button that lights up for the xbox guide button.

what i am having a problem with is i want to put some art under a perspex sheet. but the top of my joystick is 38x22cm so its bigger than A4. i have looked at getting it blown up through a website but none of them will do it in the right format(38x22) so i dont know what to do- what have other people done about this problem.

thanks

Title: Re: noob here starting 1st project, need some help!
Post by: bfauska on October 22, 2007, 03:59:43 pm

mamemarquees (http://www.mamemarquees.com)

Title: Re: noob here starting 1st project, need some help!
Post by: D4RKSL4Y3R on October 22, 2007, 04:29:49 pm

cheers mate

Title: Re: noob here starting 1st project, need some help!
Post by: bfauska on October 22, 2007, 04:49:29 pm

No problem.  Be sure to post some pictures of the progress and finished product.  It's always nice to see others work.
 :cheers: