Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: BORIStheBLADE on October 20, 2007, 05:01:42 pm
-
I got a free cab from my buddies dad that used to be I think a Galaga cab. I had to build a new control panel because the old one was trashed. Right now my dimensions are 28"x9". I am going with the 7 button arched layout.
Now for the question, the lowest left button on the 7 button layout is 1"1/2 from the bottom edge of the panel. If I were to ditch the 7 button layout the buttons would be three inches from the edge. Is it too close to the edge?
I was trying to keep it close to the original so I wouldn't have a problem getting it in the house. I went to a local arcade and most of the fighting cabs I found were the same depth as mine.
What do you think?
-
I got a free cab from my buddies dad that used to be I think a Galaga cab. I had to build a new control panel because the old one was trashed. Right now my dimensions are 28"x9". I am going with the 7 button arched layout.
Now for the question, the lowest left button on the 7 button layout is 1"1/2 from the bottom edge of the panel. If I were to ditch the 7 button layout the buttons would be three inches from the edge. Is it too close to the edge?
I was trying to keep it close to the original so I wouldn't have a problem getting it in the house. I went to a local arcade and most of the fighting cabs I found were the same depth as mine.
What do you think?
Ad an image of your layout otherwise we can't see what you mean. Don't you have space to move everything up to keep the 7 buttons but gain some space to rest your hand palms?
-
Right now my dimensions are 28"x9".
What do you think?
I only had a 25 (or so) inch width, maybe 10 inch depth and I fit a 3" Trackball, spinner and two player/6 button set-up. It was housed in a Centipede replica (see my sig). I had no problem with it. If you don't have a trackball, then you'll have more than enough space.
I think even SFII was only somewhere between 24-26" wide IIRC.
-
I got a free cab from my buddies dad that used to be I think a Galaga cab. I had to build a new control panel because the old one was trashed. Right now my dimensions are 28"x9". I am going with the 7 button arched layout.
Now for the question, the lowest left button on the 7 button layout is 1"1/2 from the bottom edge of the panel. If I were to ditch the 7 button layout the buttons would be three inches from the edge. Is it too close to the edge?
I was trying to keep it close to the original so I wouldn't have a problem getting it in the house. I went to a local arcade and most of the fighting cabs I found were the same depth as mine.
What do you think?
Ad an image of your layout otherwise we can't see what you mean. Don't you have space to move everything up to keep the 7 buttons but gain some space to rest your hand palms?
:applaud: Have I read this right? Q posted 2007, 1st reply posted 2014?? 7 years to get a reply!? It'd be like that chinese soldier walking out the jungle if the OP responds!! :applaud:
-
HAHAHAHA! Just noticed that. Although, why did DeLuSioNaL29 edit it on the 16th?
-
Good spot. Adds to the puzzle -
Who the hell is DeLuSioNaL29??? (no offense to relevant parties)
And why's he randomly editing 7 year old posts?
-
I was distracted by the fact that someone was asking if their control panel was too ** small **, instead of what do you think of my 6 player aircraft carrier with 48 buttons?
-
I was distracted by the fact that someone was asking if their control panel was too ** small **, instead of what do you think of my 6 player aircraft carrier with 48 buttons?
I'm interested to see how the joysticks would be angled on that thing. :cheers:
-
:blowup:
I just noticed that...