Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: kowal on October 03, 2007, 03:24:38 pm

Title: MiniPAC 2xOptical Rotary Joystick
Post by: kowal on October 03, 2007, 03:24:38 pm

I have problem.

after connecting Rotary stick to miniPAC cursor moves only left.
how I twist in right it moves in left. how I twist in left it moves in left also.

I fastened to trackball (X/Y) and spiner (Y) it acts in one position only up or left:(

http://www.ultimarc.com/mp_inst.html

cables from joystick have 4 colours. which cables this GND, +5V, X1, X2?
(http://img234.imageshack.us/img234/4531/happah4.png)

Title: Re: MiniPAC 2xOptical Rotary Joystick
Post by: shardian on October 03, 2007, 04:26:14 pm

Why are you hooking rotary joysticks to the minipac? It does not support them.

Title: Re: MiniPAC 2xOptical Rotary Joystick
Post by: 2600 on October 03, 2007, 05:00:25 pm

Yes, it does.  Optical Rotary

If this is a Happs Optical Rotary, I think the pinout is the same as J3 or J4 in the Ultimarc link.

Title: Re: MiniPAC 2xOptical Rotary Joystick
Post by: kowal on October 04, 2007, 10:02:17 am

cable crossing:P

this works