Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Hawk Daddy on September 09, 2007, 09:58:48 pm

Title: Source for 4 in 1 jamma adapters
Post by: Hawk Daddy on September 09, 2007, 09:58:48 pm

I need to know where I can get 2 4 in 1 jamma harness's so that I can contect 4 jamma pcbs into one cab.

Hawk

Title: Re: Source for 4 in 1 jamma adapters
Post by: BobA on September 09, 2007, 11:26:44 pm

Slow to load page.  Sells from web site and on ebay.   4 in 1 jamma adapter

Y Plus (http://www.arcademvs.com/ARCADE_ACESSERIOR.htm)

Title: Re: Source for 4 in 1 jamma adapters
Post by: Hawk Daddy on September 10, 2007, 12:30:24 am

Um is there like a 1 or 2 foot jamma harness extender, just to make the wires longer.

Hawk

Title: Re: Source for 4 in 1 jamma adapters
Post by: BobA on September 10, 2007, 12:41:28 am

All you need to extend a jamma harness is a harness and a finger board.   Attach them together pin by pin and you have any length jamma extension that you need.

Title: Re: Source for 4 in 1 jamma adapters
Post by: Hawk Daddy on September 10, 2007, 12:54:13 am

I need it to be flexible, What I have to do, it make a frame and put 4 golden tees in the frame, connect them to the jamma selector, then also make a selector for the trackball kick harness.

Hawk

Title: Re: Source for 4 in 1 jamma adapters
Post by: BobA on September 10, 2007, 09:31:43 am

A jamma harness is about 6 ft long and is flexable.  The fingerboard at the end of it just allows you to plug it into your existing jamma harness.   I am saying to  add an additional harness and fingerboard to make a flexable extension.