Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Hawk Daddy on September 01, 2007, 02:11:19 am
-
Hey people, does anybody have a pinout to wire up a galaga to a switcher? I already have the switcher, and would really like to just hook it up my self. Any help is appreciated.
Looking for the pinout of this.
(http://www.arcadeshop.com/pics/g-b-rx-ps.jpg)
Hawk
-
Anybody?
Hawk
-
Is the connector on the PS supposed to replace the J2 connections on the PS board? If that is all can you get the pinouts from the J2 connector on the PS schematic to figure out what the connections are on the switching PS? Is the board just a connector or are there any components involved that I cannot see in the picture? (backside of PCB)
-
You guess is as good as mine, thats why I was asking, I don't really know that much about hooking this one up to a switcher. I know that it will work I just don't know how.
Hawk
-
Ok i guess you don't have one so perhaps you should send a PM to Cheffo Jeffo. I think he did a galaga cab with a switcher conversion from arcadeshop.com.
-
Ah ... I took a break from the boards, then was away for the weekend, so I just found the thread and that explains HD's PM ...
So, you are looking for the "which voltage" goes to which pin on an existing Galaga harness ?
Well, I wouldn't feel right about posting something based directly on stuff I bought from Steve, but I do have some notes I made before I realized what a good value Steve's kit was relative to my time.
Let my try and find them.