Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: baccabean on August 26, 2007, 11:36:09 pm

Title: Rolling Monitor... could use advice
Post by: baccabean on August 26, 2007, 11:36:09 pm

I am learning to walk when it comes to the realm of arcade machines. I have a  street fighter Dynamo Cab, and changed the board over to a MKombat jamma pcb and the screen is rolling. I will be more than willing to provide information on any piece if you point me in a direction. The SF2 board is fine the roll occurs with the new board.

I am sorry for not posting all the info needed to get a solid reply, but I am new and learning.

Is the board shot or is there hope?

Title: Re: Rolling Monitor... could use advice
Post by: grantspain on August 27, 2007, 02:56:34 am

when you swap out boards sometimes you need to adjust the monitor,in your case the hold/shift adjustments just need a tweek

Title: Re: Rolling Monitor... could use advice
Post by: Ken Layton on August 27, 2007, 11:07:33 am

Yes, all Jamma video is not exactly the same from board-to-board. It is very common to need to adjust some controls on the monitor when swapping boards.