Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: ncflagg on August 24, 2007, 10:33:08 pm

Title: Sanyo 20EZV screen shrinking (fixed)
Post by: ncflagg on August 24, 2007, 10:33:08 pm

I have several Sanyo 20 ezv nintendo monitors and most (some worse than others) have part of the upper screen mssing. Is this due to a failing part or am I missing an adjustment somewhere?

Title: Re: Sanyo 20EZV screen shrinking
Post by: SirPeale on August 25, 2007, 11:13:46 am

That is classic EZ cap failure.  Replace all caps at this time.

Title: Re: Sanyo 20EZV screen shrinking
Post by: t8erbug on August 25, 2007, 08:08:11 pm

Same problem on same monitor in a DK 2. Bob Roberts kit cured it.

Title: Re: Sanyo 20EZV screen shrinking
Post by: ncflagg on August 27, 2007, 10:34:41 pm

I put in a cap kit from Mike's Arcade (it had some resistors too).

Title: Re: Sanyo 20EZV screen shrinking
Post by: 2600 on August 29, 2007, 09:04:30 am

Which Resistors came with the CAP kit?

Title: Re: Sanyo 20EZV screen shrinking
Post by: ncflagg on September 03, 2007, 07:58:33 pm

The Mike's Arcade Sanyo 20 EZV Cap Kit came with:

R472 33 Ohm  Org, Org, Blk
R473 1 Ohm  Brn, Blk Gld
R478 1 Ohm Brn, Blk Gld