Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: GMZombie on August 04, 2007, 01:15:36 pm

Title: guys i got a quick wiring question about donkey kong
Post by: GMZombie on August 04, 2007, 01:15:36 pm

ok im trying to rewire up this 4 board donkey kong board so i can put it in a cab since i havent been able to find a dk wiring harness from the cocktail around. Now the board asks for +24v. im using one of those jammaboards.com jamma adapter and i dont recall any 24v being on jamma? where do i get this voltage from

Title: Re: guys i got a quick wiring question about donkey kong
Post by: BobA on August 04, 2007, 01:38:00 pm

The 24 V was supplied to the CPU board from the DK Power Regulator board.  You would need a separate power source to supply this to your board as it is not a standard voltage.

Title: Re: guys i got a quick wiring question about donkey kong
Post by: GMZombie on August 04, 2007, 02:30:38 pm

now is that just for the coin counter or can i not run this board without the 24v

Title: Re: guys i got a quick wiring question about donkey kong
Post by: BobA on August 04, 2007, 04:18:56 pm

Sorry I don't know where it goes on the CPU board as I do not have a schematic of the board.   Maybe someone else with DK can help.