Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: ssfear on July 22, 2007, 09:53:59 pm
-
Hi there,
I've got an Electrohome G07 CB0 19" monitor that's down.
It just started to show up black, then I would turn it off and on and eventually it would work. I did this probly 20 times and then one time I went to use it and it just wouldn’t turn on at all.
There were to other signs, no smells, no smoke.
There is no picture, but has a soft whistle on the power up and whistle on the power down.
I'm planning to get the Repair Kit from Bob (with the Flyback).
I just thought I'd run it by the pro's first for your sugguestions, comments, etc...
Thanks again,
ssfear
-
Repair kit is a good start.
-
Ive got one in the same condition. Where's the best place to get a repair kit. What should i look for in component brands.
-
The kit that bob has is for $26,
http://therealbobroberts.net/parts.html#flyback
http://therealbobroberts.net/g07.gif
(He takes orders by emailing him and asking for the parts)
bob147 AT bellsouth.net
Electrohome G07 CB0 19" Repair kit with flyback.
What game did your monitor come out of ?
I've got a Mylstar M.A.C.H 3 cabinet , was converted a couple times over, I'm sure the power supply is good to sell. Wondering if I should restore the cabinet or not.
Anyhow, thanks
-
Im working on a Galaxian. The game is running, you can here it playing. The box is in good but not great shape, so i thought i would try to get it up and running.
As for the box, if you are going to use it or clean it up for a good price, i say go for it. If your just making a black box, they sell good ones for 50$ or less at the auctions.