The NEW Build Your Own Arcade Controls

Main => Everything Else => Topic started by: skirge66 on April 24, 2003, 04:39:02 am

Title: t-molding router bit?
Post by: skirge66 on April 24, 2003, 04:39:02 am

Is there a spacific name for the router bit used for cutting the trench for t-molding? where is a good place to get them? I asked at home depot about t-molding, and they looked at me like I had a 3rd eye...I would assume they do not carry the bit either.  I know this is a remedial question, and probably has been asked before and i do appologize.

I will be using 3/4" t-molding. thanks for the help

Title: Re:t-molding router bit?
Post by: rampy on April 24, 2003, 10:04:02 am

http://www.t-molding.com    sells the bit to go along with their t-molding...

I got my 1/16" slot cutting bit from http://www.mlcswoodworking.com/


here's a previous thread (http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=4605;start=0) with more info

*shrug*

rampy

Title: Re:t-molding router bit?
Post by: skirge66 on April 24, 2003, 03:30:38 pm

thanks again rampy...you seem to always come through with the useful link and useful threads, maybe with a little luck some day i will know these boards as well as you.

if you're ever in arizona i'll buy you some beers, thanks again.