Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Ziggy on July 11, 2007, 03:43:36 pm

Title: A need a manual for /// Action Claw ///
Post by: Ziggy on July 11, 2007, 03:43:36 pm

I have a problem with my Action Claw ( Ac-1 rev a) the machine go to front but don`t move to the left and do not return to original position.

Title: Re: A need a manual for /// Action Claw ///
Post by: Ziggy on July 12, 2007, 11:57:31 pm

Creo que es modelo /// Betson Action Claw crane ///, si me pueden ayudar.

Title: Re: A need a manual for /// Action Claw ///
Post by: Kevin Mullins on July 13, 2007, 12:48:54 am

I would start by checking all the microswitches on the joystick, then I would check all the microswitches up in the carriage assembly.

The switches on the joystick obviously are what tells it what direction to move in.
(left, right, forward, back)

The switches in the carriage tells it where the claw is.
There should be a switch where the claw goes up and down that tells it when it is in the "up" position, this will then send the whole carriage to the "home" position.

Start there.......