Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: mlyday on July 05, 2007, 01:49:06 pm

Title: metal speaker grill
Post by: mlyday on July 05, 2007, 01:49:06 pm

Any idea where I can find sheets of the aluminum with the tiny offset holes, occasionally used as speaker covers.  I need sheets, not preformed grills, and cloth wont work in this application.

Thanks in advance.

Mark

Title: Re: metal speaker grill
Post by: shardian on July 05, 2007, 04:40:58 pm

http://www.partsexpress.com/pe/showdetl.cfm?&Partnumber=262-870

Title: Re: metal speaker grill
Post by: mlyday on July 06, 2007, 08:54:00 am

Do you know if the 6mm is the size of the holes. Because 1/4" holes are a little big.  But this does come in the flat sheet, so its close to what I want.

Title: Re: metal speaker grill
Post by: shardian on July 06, 2007, 08:58:44 am

6mm is what it says, so that's what it is. The picture is quite misleading though.

Title: Re: metal speaker grill
Post by: mlyday on July 06, 2007, 10:02:03 am

I was just wondering if you knew for sure,  some of the stuff I had been looking at was listing 2 values,  one was the hole size and one was the offset length. 

Ill shoot them an email and ask for sure.  The picture looked promising.

Mark