Build Your Own Arcade Controls Forum
Main => Consoles => Topic started by: northerngames on June 21, 2007, 09:25:58 pm
-
all set now
-
:hissy: lol.
-
I have an official DC arcade stick that I can part with. Do you want it?
-
depend how much your asking for it and what type it is but I am mainly after these:
2 matching light guns
2 controller extension cables
1 audio/video rca style tv cord
1 vga box that allows the DC to hook to a vga monitor
1 fishing controller
2-4 controller's prefferably stock grey but not a must colorwise
-
depend how much your asking for it and what type it is
There's only one type of official Dreamcast stick.
(http://www.segagagadomain.com/hardware/dc-arcadestick-f.jpg)
Some people are replacing the stock parts with Sanwa or Seimitsu. Others also add a Dual Shock board inside for PS1 and PS2 usage. They don't always remove the Dreamcast board, instead choosing to leave it a dual-system stick.
-
I will pass on the arcade stick just looking for what I listed above mainly
I will be hooking mine to a real arcade control panel so i would not have much use for it but thanks for the offer.
-
depend how much your asking for it and what type it is
There's only one type of official Dreamcast stick.
(http://www.segagagadomain.com/hardware/dc-arcadestick-f.jpg)
Some people are replacing the stock parts with Sanwa or Seimitsu. Others also add a Dual Shock board inside for PS1 and PS2 usage. They don't always remove the Dreamcast board, instead choosing to leave it a dual-system stick.
Or just buy a X Arcade......
-
no I already have a real arcade control panel and buttons and have no use for it sorry.
also not an x-arcade fan anyhow and would not use one for anything I make my own custom control panels to any size or shape I need plus I hear the wiring is goofy in them but I already have buttons joysticks and control panel just looking for the above is all.
-
Now I am only after dreamcast light guns and a dreamcast to Ipac adaptor
-
there's a dreamcast lightgun to ipac converter? where can I pick up such an animal? Does it allow use of the lightgun in mame?
-
sorry I had left out the dreamcast "controller" to ipac adaptor
it is an adaptor that allows the ipac's to plug into the dreamcast and saves the hassle of hacking and hard wiring the stock controllers to the buttons and joysticks and with this adapter it makes it a plug and play swap and avoids all the hassle of having to do wires over or tap into your current Control panel..
but none the less I think they do work with the J-pac and they enable light guns so it may work with them but I have no clue and have not asked around about that yet but it would be nice ;D
-
I am all set now I got the light guns I was after and I decided not to bother with the ps2 to dc adpapter then that to an ipac adapter just to get the controllers working with acade controls I found them to cost more then building myself another custom control panel with my likings along with some holsters for the light guns along with new buttons and joysticks and just use 2 stock hacked dreamcast controllers it is a little more work then buying the adapters alone but should be cheaper and have new controls to go with it..