Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Timoe on June 02, 2007, 08:41:05 pm

Title: P360 base the same size as a super base?
Post by: Timoe on June 02, 2007, 08:41:05 pm

Can I use my Happ super router template for a P360?

I am top mounting a P360 that wont arrive for a few weeks.  Can I use the same router template to top mount it?

Title: Re: P360 base the same size as a super base?
Post by: Kremmit on June 02, 2007, 08:48:57 pm

Should match fine.  Go for it.

Title: Re: P360 base the same size as a super base?
Post by: Jeff AMN on June 02, 2007, 09:15:50 pm

Yes you can.

I have a panel that has two P360s and one super. While I was putting the panel together I checked out of curiosity and they were the same.

Title: Re: P360 base the same size as a super base?
Post by: Kremmit on June 03, 2007, 02:50:55 am

FWIW, P-360s are made on the same base pattern as old-school Wico sticks- which, in turn, have the same mounting dimensions as Happ Ultimates, Competitions, Reunions, 49-ways and Supers.

Title: Re: P360 base the same size as a super base?
Post by: Timoe on June 03, 2007, 09:14:50 am

Yeah, I used my Wico base just to be sure.  My concern was the are under the top of the base.  I figured the widest part of the base (top) looked exactly like a wico.

My concern was the circle part on the bottom of the P360.  I dont know if I'll be able to "drop in" for a top mount.  Does the round base part come off?

Title: Re: P360 base the same size as a super base?
Post by: Kremmit on June 03, 2007, 05:29:01 pm

Yeah, the round part will unscrew.  It's just barely wider than the narrow dimension of the top portion of the base assembly, like 1/16" - 1/8" wider.  The round part begins 1 1/8" from the top of the base assembly, and the total height of the base assembly is 2 1/8" with the round part installed, not including handle/actuator.