Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Craig Pilecky on April 15, 2003, 04:34:53 am
-
Im just curious how big most of you have built your cabinets. Im betting that mine is one of the largest. But to accomodate a 27" TV it had to be pretty large. I assembled it in the room that its in, but if I have to I can get it through the door if I unbolt the control panel.
Height: 72.5"
Width: 28.5"
Depth: (at base 38") (at control panel 44.5")
-
22" Wide and 26" deep at the control panel, and 61" tall (Artic Mini cab).
I am not really into really big cabinets, as it is hard to follow all the action on a large screen. Like those new 25" monitor Ms Pac/Galaga machines. I gotta kind of stand back from the thing to see the whole screen. I prefer the 19" monitor ones. If you really want some high scores, try a cocktail, or mini of some kind that uses a 13" monitor. Very easy to see everything at once.
-
My current design has the
Height: 198cm (78")
Width: 85cm (33.5") (cabinet only - 4-p panel is much wider)
Depth: 105cm (41.3") (125cm or 49.2" with panel)
Height and depth may change slightly depending on placement of 27"TV. Based on a Midway type cab. This has to go through the sliding door out the back. The height may drop if I decrease the space above the tv, but this would cause the tv the be angled more (keeping roughly perpendicular with my eye level) causing it to be slightly deeper. I think I might need someone to look over my design to make sure I have the measurements and angles right.
Cheers
-cdbrown
-
Mines
70" Tall
32" Deep
25" Wide (37" with CP on)
-
Hmmm.. can't remember specific mesurements..
about:
70 somthing inches tall
27" wide
30 something inch cp
-
the standard Centari cabinet is a hair under 25.5" wide for a 19" vertical monitor.
I don't remember the other dimensions.
Bob
-
measurements are all on my stie:)
Anyway
25" wide x 73" high x 38" deep
Size wise it is based off my double dragon II cabinet. It's a little deeper than the ddragon2 cabinet.
-
Without the control panel attached the measurements are:
75"height x 28-1/2"width x 43"depth
My control panel measurements are:
7"(front) to 9"(back) sloping height x 57"width x 19"depth
-
my cab is
38" deep
29"wide
~72" tall