Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: Timoe on April 22, 2007, 09:05:56 pm

Title: WTB Wico Dustwashers
Post by: Timoe on April 22, 2007, 09:05:56 pm

I need a couple of Wico dustwashers or blank dustwasher material and I can drill my own.

Title: Re: WTB Wico Dustwashers
Post by: rockin_rick on April 22, 2007, 11:42:42 pm

You may be wanting a better deal than this, but these are only $2.00... ea.

http://www.mikesarcade.com/cgi-bin/store.pl?sku=JOYGUARDW

I would be interested in a source for blank dustwasher material to make your own....

Hope this helps,
Rick

Title: Re: WTB Wico Dustwashers
Post by: NiteWalker on April 23, 2007, 02:26:41 am

Maybe 1/16" ABS textured plastic? That's what it looks like to me. I've also seen people make them out of clear acrylic.

Title: Re: WTB Wico Dustwashers
Post by: Timoe on April 23, 2007, 08:41:28 am

Quote from: NiteWalker on April 23, 2007, 02:26:41 am

Maybe 1/16" ABS textured plastic? That's what it looks like to me. I've also seen people make them out of clear acrylic.

Nitewalker,

Any ideas where I can pick that up?

Title: Re: WTB Wico Dustwashers
Post by: NiteWalker on April 23, 2007, 11:58:32 am

Here's (http://cgi.ebay.com/ebaymotors/Black-ABS-Plastic-Sheet-12-X-12-3-32-Thick-Dash-Part_W0QQcmdZViewItemQQcategoryZ33705QQihZ010QQitemZ200102502529QQrdZ1QQsspagenameZWDVW) some 3/32" and here's (http://www.tapplastics.com/shop/product.php?pid=335&) tap plastic's page on ABS sheets. There doesn't seem to be 1/16" available but there is 1/32".

Title: Re: WTB Wico Dustwashers
Post by: rockin_rick on April 23, 2007, 08:23:33 pm

That's pretty cool.  You could make a bunch with that...  And if you were to go dust washer under the CPO, then you don't even need to make the outside of it perfectly round...  Although a hole saw may make it easy to get nice and round...

Rick