Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: Cisekitf on April 21, 2007, 05:45:41 am

Title: Hantarex Polo 25" problem
Post by: Cisekitf on April 21, 2007, 05:45:41 am

The problem is taht after about 20 minutes after I turn it on, it just like in the video - http://youtube.com/watch?v=QRn8A4K303Q
I woul be very thankful for anyone who can give some clues.

Title: Re: Hantarex Polo 25" problem
Post by: SirPeale on April 21, 2007, 06:26:55 am

The snapping sounds like a charge is building up.  Around the tube there should be a wire that should be connected to the neckboard, is it?

Title: Re: Hantarex Polo 25" problem
Post by: Cisekitf on April 21, 2007, 06:43:32 am

Yes there is one, looks like a shoe-lace.

Title: Re: Hantarex Polo 25" problem
Post by: grantspain on April 21, 2007, 01:45:47 pm

or it could be a filthy anode cap arcing/dry solder joint on the flyback,even the flyback breaking down.
its worth looking at the back to see if you can see an arc anywhere