Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: karlpenney on April 08, 2007, 10:57:02 pm

Title: Centipede front panel offset?
Post by: karlpenney on April 08, 2007, 10:57:02 pm

Hi,

I am scratch building a replica Centipede cabinet using plans from Jakobud.  These show the front (coin door) and top panels as being offset 1/2" in from the edges of the side panels.  I think I've looked at almost every picture of a Centipede cabinet I could find, and not sure 1/2" is correct.  Looks like it might be less.  Can anyone with a Centipede cabinet verify this measurement?  Also looking for height of the two fixed panels on the back (the ones at the top and bottom).

Thanks