Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: More Cowbell on March 13, 2007, 10:14:27 am
-
I'm just looking for one of the simple leaf joysticks that used to be all over on eBay. It is for a wood control panel and hoping for 4-way (not necessarily exclusively but at least switchable via the plastic thingy).
-
Wico's don't switch via the actuator- while 8-ways and 4-ways do have different size actuators, the base is also different: on a 4-way you get a diamond shaped hole instead of the round one on an 8-way.
If you find a 4-way with the wrong color handle, Ponyboy has a good deal on nice new black handles. They come with 8-way actuators, though.
-
Wico's don't switch via the actuator- while 8-ways and 4-ways do have different size actuators, the base is also different: on a 4-way you get a diamond shaped hole instead of the round one on an 8-way.
If you find a 4-way with the wrong color handle, Ponyboy has a good deal on nice new black handles. They come with 8-way actuators, though.
I am trying to piece together two 8-ways and one 4-way. What are the differences between the two actuators? Are the 8-ways round and the 4-ways square?
-
The 4-way actuator is round, it's just a smaller diameter. Remember that the 4-way also needs the base with the diamond shaped hole, as Kremmit said.
Here's a Wico diagram courtesy of Retroblast.com that might help you out..
http://www.retroblast.com/files/WicoLeafJoystick.pdf (http://www.retroblast.com/files/WicoLeafJoystick.pdf)
-
Thanks knievel!
I was confused because the joys that came in the cabinet I am working on had 8-way bases and round actuators :dunno
I have a 4-way base coming from ebay, handles and grommets coming from ponyboy. Now I just need to locate new leaf switches. Any ideas?
-
The square actuators are for microswitch-based Wico sticks. Afraid I don't know of a source for proper Wico-fitting leafswitches, best you can do is straighten the ones you've got and clean the contacts.
-
Afraid I don't know of a source for proper Wico-fitting leafswitches, best you can do is straighten the ones you've got and clean the contacts.
It would be sweet if one of the local vendors did a little repro run of those. That seem like just about the easiest hardware repro ever. Wait a minute... maybe somebody should ask old Dave over at Ram Controls. It seems like it would be cake for that guy to do it.
-
A little while ago I was looking into wico leaf joysticks and noticed: Wico Balltop - Wico Balltop 8-way Leaf Joystick is listed at Ram Controls under "items under consideration for reproduction."