Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: xmenxmen on March 01, 2007, 05:46:13 pm

Title: type of thread and length for screw for over under coin door.
Post by: xmenxmen on March 01, 2007, 05:46:13 pm
Got this similar to the picture.

(http://pccab.net/pccab06.jpg)

Brought the coin door from member here and now would like to attach it, so need to know what type of screw to use.  And NO, I am not talking about attaching it to the cab, just attaching it to the frame.  Currently just sits in there and hope nobody kicks it.   ;D

Bottom section is lock and don't have key, so can't really check and don't really want to take it away.  Coin door is more of a show piece than anything.

thx.
Title: Re: type of thread and length for screw for over under coin door.
Post by: Ken Layton on March 01, 2007, 06:09:27 pm
Hold on thar! You've got two totally different doors pictured.

The one on the left is a Coin Controls brand (all metric). The one on the right is either a Happ Controls or Coin Mech brand (all American made).

Title: Re: type of thread and length for screw for over under coin door.
Post by: xmenxmen on March 02, 2007, 03:46:09 pm
The one I have looks like the 1st picture.  The cabinet was once a Z back similar to the one found for Street Fighter II.  Definitely not the 2nd one.

Edit: to correct which one is which..... hehe...
Title: Re: type of thread and length for screw for over under coin door.
Post by: Ken Layton on March 02, 2007, 06:05:51 pm
The one I have looks like the 1st picture.  The cabinet was once a Z back similar to the one found for Street Fighter II.  Definitely not the 1st one.

Huh? It looks like the 1st, but it's definitely not the 1st??? ???
Title: Re: type of thread and length for screw for over under coin door.
Post by: xmenxmen on March 02, 2007, 06:26:26 pm
The 1st one.
Title: Re: type of thread and length for screw for over under coin door.
Post by: Ken Layton on March 02, 2007, 07:22:28 pm
First one is Coin Controls. Definitely ALL METRIC hardware.