Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: rfr341 on February 27, 2007, 10:46:05 pm

Title: Monitor problem with wells gardner 4600 for mr do's castle
Post by: rfr341 on February 27, 2007, 10:46:05 pm

Hi, I have a Mr Do's castle with a wells gardner 4600 monitor. When I turn it on the picture is upside down which is no big deal beacause I know how to fix that but no matter how much I try to adjust the monitor the picture has a wave in it. I have included some pictures to show what I mean. I have re-capped the chassis. Any ideas what could be causing this problem? Could the picture tube itself be the problem?

Title: Re: Monitor problem with wells gardner 4600 for mr do's castle
Post by: Ken Layton on February 28, 2007, 01:11:30 am

Did you recap the main board on the monitor?

If so then visit www.homearcade.org/BBBB/slanted.html

Title: Re: Monitor problem with wells gardner 4600 for mr do's castle
Post by: rfr341 on February 28, 2007, 02:08:18 am

HI Ken, I have re-capped the main board on the monitor.