Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: Ken Layton on February 19, 2007, 01:45:45 pm

Title: Monitors and common game parts on sale
Post by: Ken Layton on February 19, 2007, 01:45:45 pm: Competitive Products (1-800-562-7283) and Happ Controls (www.happcontrols.com) have got some great stuff on sale this time I see.

Competitive Products:

SKU # 01-0013CH Kortek 13" CGA replacement chassis $49.50 (brand new genuine Kortek) Great to fix those 13" Korteks with.

Happ Controls:

#49-1329-VP2 Vision Pro 19" CGA shelf mount monitor $149.00 each

#49-1337-VP2LG Vision Pro 19" VGA/SVGA shelf mount monitor $225.00

#49-2580-00 Wells-Gardner 24.8" CGA Universal mount monitor $375.00

#49-3056-00 Makvision 24.8" tri-mode Universal mount monitor $375.00

#92-0196-00 Universal plastic tv alignment tool kit (width adjusters) $5.99

#80-0015-00 Power Pro XT power supply w/on-off switch $31.99 (perfect for those 25" Dynamo and 3Koam cabinets)

#50-6084-00 Happ Super Joystick (4 or 8 way adjustable) $7.95 each

#A-13524-1 Williams old style flipper rebuild kit $19.99 each

#A-13524-8 Williams Fliptronic style flipper rebuild kit $19.99 each

Hope this helps out somebody.
Title: Re: Monitors and common game parts on sale
Post by: ChadTower on February 19, 2007, 01:51:57 pm: If those rebuild kits include both L and R, that's a very good price.
Title: Re: Monitors and common game parts on sale
Post by: Ken Layton on February 19, 2007, 02:13:05 pm: Yes, the flipper rebuild kits include left and right components.
Title: Re: Monitors and common game parts on sale
Post by: horseboy on March 01, 2007, 05:46:06 pm: Hey Ken, is there any problem with using one of those Happ 19" shelf mount monitors without actually mounting it on a shelf? I need to put a new monitor in a Burgertime, but it obviously coesn't have a shelf for the monitor to sit on.

Also, is there a problem with that horizontal monitor be used vertically?

Thanks
Title: Re: Monitors and common game parts on sale
Post by: Ken Layton on March 01, 2007, 06:15:35 pm: Burgertime upright, just like Pacman, Galaga, Ms.Pac, etc. all used a horizontal shelf mount monitor mounted vertically by two cross bars attached to the monitor's frame.

The 19" Happ (Tovis) monitor works fine. Just take the old monitor out and transfer those two cross bar rails to the new monitor's frame.
Title: Re: Monitors and common game parts on sale
Post by: rlemmon on March 01, 2007, 09:11:51 pm: Hi ken Thanks for the heads up. Im getting one of the 19 " shelf mount vga monitors. Do I have to bolt the side and shelf brackets or can I just bolt the shelf ones to the shelf in my cab ?

Thanks
Title: Re: Monitors and common game parts on sale
Post by: FrizzleFried on March 02, 2007, 10:07:12 am: ...sigh...if only the 25" monitors would come down to REALISTIC prices...it's absurd the price is more than double for a monitor only 6" larger. I'd pull the trigger at $250 for sure.
Title: Re: Monitors and common game parts on sale
Post by: ChadTower on March 02, 2007, 10:18:20 am: Demand is what it is... people buy them at the current price so it stays there. The price is only going to go up, to, as CRTs become rarer and harder to source.
Title: Re: Monitors and common game parts on sale
Post by: Ken Layton on March 02, 2007, 10:55:10 am: Quote from: rlemmon on March 01, 2007, 09:11:51 pm
Hi ken Thanks for the heads up. Im getting one of the 19 " shelf mount vga monitors. Do I have to bolt the side and shelf brackets or can I just bolt the shelf ones to the shelf in my cab ?

Thanks

A VGA? In a Burgertime?
Title: Re: Monitors and common game parts on sale
Post by: rlemmon on March 02, 2007, 01:32:05 pm: No not for burger time :o ( that was horseboy), Its for my mame cab. :)