Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: northerngames on February 12, 2007, 07:55:19 pm

Title: switch nanao MS8-26SU 25khz med. to 15khz standard or switchable RESOLVED
Post by: northerngames on February 12, 2007, 07:55:19 pm

I am still kinda new here and not sure if I can make 2 open post in this section or not but if not I apoligize for making a second post and close on if needed.

I have a nanao 26" MS8-26SU it is a med. res. 25khz but I seen somewhere and was talking with another that some wire's can be swapped on the chassis to convert it over to a standard 15khz and this is what I am wanting to do I would at least like to get it to the standard 15khz but if anyone know's the method to add the switch to make it a switchable toggle to go from 15khz-25khz with the flip of a switch and power down thank's. 

Title: Re: how to switch nanao MS8-26SU 25khz med. to 15khz standard or switchable
Post by: Ken Layton on February 13, 2007, 12:11:32 am

I believe it is switchable by moving a large jumpr plug on the main chassis. Moving the jumper plug from "High" (medium res) position to the adjacent "Low" (standard res) position is what you need to do. DO IT WITH THE POWER OFF!!!!

Title: Re: how to switch nanao MS8-26SU 25khz med. to 15khz standard or switchable
Post by: Kevin Mullins on February 13, 2007, 12:17:43 am

Circled it .... as Ken mentioned.

Title: Re: how to switch nanao MS8-26SU 25khz med. to 15khz standard or switchable
Post by: northerngames on February 13, 2007, 01:33:29 am

done thank's guy's and I almost sold it and have to update the bst now becuase I am hanging onto it I did not want a 25khz but now that I know it is that easy and still like new it is here to stay. 

Title: Re: switch nanao MS8-26SU 25khz med. to 15khz standard or switchable RESOLVED
Post by: kilumenati on March 13, 2007, 09:46:54 pm

Nice, I was wondering how this was achieved. Thank fellas.

Kilu.