Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: coasternuts on February 02, 2007, 09:04:26 pm

Title: What's the voltage coming from GP-Wiz and can I run LED's off it?<EOM>
Post by: coasternuts on February 02, 2007, 09:04:26 pm

I noticed the V+ and G labeld on the PINS.
Only looking for a couple LEDs.

Thanks.

Title: Re: What's the voltage coming from GP-Wiz and can I run LED's off it?<EOM>
Post by: RandyT on February 03, 2007, 01:30:41 am

+5v straight from the USB port.  It will support a few LED's no problem, just make sure to use the proper current limiting resistors and use care not to short it to ground.


RandyT