The NEW Build Your Own Arcade Controls

Software Support => DOS/WinCab => Topic started by: mr_cbf on January 29, 2007, 07:23:51 am

Title: Skin - idea's and how to?
Post by: mr_cbf on January 29, 2007, 07:23:51 am

Hi Guys

anyone able to replicate this in a skin at all? or wondering how hard it would be, need to get a better res photo I believe?

Just after some thoughts. Thanks Mal

FYi - just using 15 inch touch screen, have another but unsure if wincab can use 2 monitors?

Title: Re: Skin - idea's and how to?
Post by: Chris on January 29, 2007, 07:52:52 am

WinCab doesn't know anything about multiple monitors, unfortuntely.  Do you happen to know what model jukebox that is?

--Chris

Title: Re: Skin - idea's and how to?
Post by: mr_cbf on January 29, 2007, 04:00:19 pm

Hi Chris

No worries on the mulitple monitors.

The pictures are from a seeburg M100 B (1950-1952 model) , the pictures came from some searches on the net.

I'm looking at building a replica of that model and wanted the screen on the touch screen to match the 2 title strips that will go either side of it.

Cheers Mal - oh, here's a picture of the full sized title strips section. As see, what the screen to to the middle section then have 2 seperate panels which I'll build one either side of the screen. Hope this makes sense?

Title: Re: Skin - idea's and how to?
Post by: JustMichael on January 30, 2007, 05:03:16 pm

Chris, is it possible to have more than 1 stripgrid in a skin?  Looks like he would need 3.

Title: Re: Skin - idea's and how to?
Post by: Chris on January 30, 2007, 09:17:37 pm

Yes, they just need to be labelled StripGrid1, StripGrid2, etc.