The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: DeathMonk on January 22, 2007, 12:43:08 pm

Title: ArcadeVGA Problem...
Post by: DeathMonk on January 22, 2007, 12:43:08 pm

I have an original ArcadeVGA.

A couple weeks ago I started up the ole arcade cab and there was no picture [D9200 "no signal"].

I hooked the computer up to my computer monitor and used the second VGA connector on the card..  No picture UNTIL it gets into windows..

I'm guessing that I am SOL and need to buy a new card, but just wanted to make sure before I dropped 100 bones.

DM

Title: Re: ArcadeVGA Problem...
Post by: ScottS on January 23, 2007, 06:28:12 pm

I hear that Andy at Ultimarc is a pretty helpful guy. Why not send him and e-mail and see what he says? If anybody can help you get the card working, it's him!

Title: Re: ArcadeVGA Problem...
Post by: DeathMonk on January 24, 2007, 08:23:20 pm

I guess I will..  I thought he usually answered questions on this forum, though.

Title: Re: ArcadeVGA Problem...
Post by: AndyWarne on January 25, 2007, 03:25:32 pm

DM, If you have not already emailed me about this please do, I should be able to help.
Andy

Title: Re: ArcadeVGA Problem...
Post by: DeathMonk on January 27, 2007, 02:58:08 am

So,

It ends up it's not actually a problem with the ArcadeVGA, but a problem with my D9200.

Anyone know what could cause these symtoms?


DM