Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: NemX2 on January 17, 2007, 01:19:42 pm
-
Recently replaced my happ ulimates with 2 ultrastik 360's and love them. The problem I have with one of the sticks is it will only work up/down. Even with pushing a 8-way or 4-way map will result in the same. The only thing that looks different from the working stick is the led on the non-working stick is flashing. I sent a e-mail to andy @ ultimarc, but was wondering if anyone else has had this problem.
thanks
-
Recently replaced my happ ulimates with 2 ultrastik 360's and love them. The problem I have with one of the sticks is it will only work up/down. Even with pushing a 8-way or 4-way map will result in the same. The only thing that looks different from the working stick is the led on the non-working stick is flashing. I sent a e-mail to andy @ ultimarc, but was wondering if anyone else has had this problem.
thanks
Well have no fear. Andy will solve your issue one way or another I'm sure!!
:cheers:
-
What is your firmware version?
-
Updated to 1.7 just in case, but no change.
-
Andy responded. He is sending a replacement PCB. Whoot! Can't wait to have two of these working. Best joystick I've used ever in my cabs.
-
Andy responded. He is sending a replacement PCB. Whoot! Can't wait to have two of these working. Best joystick I've used ever in my cabs.
I have to agree. Others interested in reading some stuff on the Ultra Stik 360 sticks, here are a couple of links...
From the pros at retroblast...
http://retroblast.com/hardware.html
&
The humans at BYOAC...
http://forum.arcadecontrols.com/index.php?topic=57107.0