Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: Hawkypro on January 11, 2007, 08:04:28 am

Title: Using an JenShinn from 8liners
Post by: Hawkypro on January 11, 2007, 08:04:28 am

Just want to post a pic. showing the results of using a JenShinn chassis from 8liners. I replaced a Hantarex Polo 25" chassis. A few minor color adjustments still need to be done but, overall im happy with the results with this chassis. ( camera flash affecting the screen a bit.) A positive generic chassis swap.

Title: Re: Using an JenShinn from 8liners
Post by: Ken Layton on January 11, 2007, 11:47:26 am

Let's see pix of the chassis installed too.

Title: Re: Using an JenShinn from 8liners
Post by: Hawkypro on January 11, 2007, 01:23:51 pm

Ken,

I will get a few of the chassis installed too. Ill post them tonight.

Title: Re: Using an JenShinn from 8liners
Post by: grantspain on January 11, 2007, 05:22:54 pm

the screen looks good,like i said before we don't have generic chassis available in the u.k but after seeing another positive chassis swap i will be looking in to this in further detail

Title: Re: Using an JenShinn from 8liners
Post by: Hawkypro on January 12, 2007, 10:12:25 am

Here is a pic. of the chassis installed.

Title: Re: Using an JenShinn from 8liners
Post by: Ken Layton on January 13, 2007, 11:49:02 am

Did this chassis have a pincushion adjustment on it?

Title: Re: Using an JenShinn from 8liners
Post by: Hawkypro on January 13, 2007, 12:12:07 pm

Ken,

Yes, it does have a pincushion controll on it. Its located right next to the flyback. The picture I posted shows it. Next to the green cap, just to the right (white color pot). I should have taken a top down picture while i had it out of the chassis frame.

Title: Re: Using an JenShinn from 8liners
Post by: albert_c on January 15, 2007, 06:44:00 pm

How much did that replacement chassis cost you?

Albert

Title: Re: Using an JenShinn from 8liners
Post by: Hawkypro on January 15, 2007, 08:00:32 pm

kage 8,

The chassis cost me a 100.00 and still working great.

Hawkypro.