Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: myka316 on January 06, 2007, 11:26:09 pm

Title: Green line across monitor
Post by: myka316 on January 06, 2007, 11:26:09 pm

Well I plugged in my SF:II Hyper pcb today and powered it up in my cab containing a WG 25K2193 Monitor and all I got was a green line going straight across the screen.  I tried adjusting the position and such and it simply expanded ever so slightly.  Any idea as to what I am supposed to do?

(http://img.photobucket.com/albums/v291/myka486/2-3.jpg)
(http://img.photobucket.com/albums/v291/myka486/3-3.jpg)

Also, if anyone could find me a schematic/manual for the monitor it would be greatly appreciated.

Title: Re: Green line across monitor
Post by: Ken Layton on January 07, 2007, 01:04:38 am

I have a repair guide for that model. There's a service kit you need to buy from Wells-Gardner's parts department to correct the "no vertical sweep" problem you have.

Title: Re: Green line across monitor
Post by: myka316 on January 07, 2007, 01:56:17 pm

Quote from: Ken Layton on January 07, 2007, 01:04:38 am

I have a repair guide for that model. There's a service kit you need to buy from Wells-Gardner's parts department to correct the "no vertical sweep" problem you have.

Hey Ken,

Would it be possible for me to contact you through PM/Email and possibly obtain that guide if it's in digital format?  Also, would you happen to know the service kit parts # that is needed?  I couldn't find my model listed under the site but I have heard that it either IS or is similar to the U2000 monitor.

Thanks for the help

Title: Re: Green line across monitor
Post by: Ken Layton on January 07, 2007, 02:06:06 pm

You can shoot me an email if you want the guide. It lists ALL the kits for the U2000. Your monitor is indeed a U2000 (2193).

Title: Re: Green line across monitor
Post by: myka316 on January 07, 2007, 02:25:05 pm

Just shot you an email.

Thanks again for the help Ken.