Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: Dave Dribin on December 29, 2006, 11:00:01 am
-
Hello,
The D9200 had horizontal frequency limitiations, i.e. it would only support 15.75kHz, 25kHz, and 31.5kHz, not the entire range between 15.75 - 31.5kHz, like the spec sheet says. Does anyone if the D9400 and D9500 have similar limitations, or if they can use any horizontal frequency within range?
Thanks,
-Dave
-
I'd say the best way to get the correct answer would be straight from the horse's mouth: Wells-Gardner tech support.
-
Agreed. I was just curious if someone else had already done that. I'll contact them after the new year, and post what I find out.
-Dave
-
Funny, my d9200 has synched with everything i've thrown at it.
-
I'm just getting my info from Des Jones' D9200 FAQ (http://easymamecab.mameworld.net/html/d9200.htm). He's got a scan (http://easymamecab.mameworld.net/files/d9200.jpg) of a rather official looking Wells-Gardner document that states:
This monitor is capable of operatin in (3) differenent scan frequencies CGA(15.75kHz), EGA(24.8kHz) and VGA with a +/- 1kHz tolerance, by simply selecting a video input and changing the cable position.
The WG site says nothing about any this, though.
-Dave
-
I'm just getting my info from Des Jones' D9200 FAQ (http://easymamecab.mameworld.net/html/d9200.htm). He's got a scan (http://easymamecab.mameworld.net/files/d9200.jpg) of a rather official looking Wells-Gardner document that states:
This monitor is capable of operatin in (3) differenent scan frequencies CGA(15.75kHz), EGA(24.8kHz) and VGA with a +/- 1kHz tolerance, by simply selecting a video input and changing the cable position.
The WG site says nothing about any this, though.
-Dave
Could be an older version I suppose, I purchased mine well after desmatic purchased his I believe.