Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: MartyNg on December 19, 2006, 08:55:31 pm
-
My JPAC has been working fine for months, and now all of a sudden, it loses its programming whenever I reboot my WinXP machine! I have to reprogram it with the winipac program every time I boot into Windows! Anyone have any ideas for what could be causing this? Thanks!
-
Never mind. Out of frustration I tried several reboots, several unplugs and replugs of the JPAC USB connection, and several uninstalls of the "Human Interface Device" drivers and it seems to stay programmed now! ???
-
In the future whenever that happens, do the following:
1) Go into Device Manager in windows, and Uninstall ALL of your USB ports (Do not worry, they will all re-install on their own on next boot)
2) After doing the above step, then download this (http://ultimarc.com/Ipacfix.reg) and double click on it.
That should fix her up for a while.
-
In the future whenever that happens, do the following:
1) Go into Device Manager in windows, and Uninstall ALL of your USB ports (Do not worry, they will all re-install on their own on next boot)
2) After doing the above step, then download this (http://ultimarc.com/Ipacfix.reg) and double click on it.
That should fix her up for a while.
Ahhh....some prescribed steps that may fix the problem should it happen again. These will come in handy! Thanks! :cheers: