Build Your Own Arcade Controls Forum
Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: squirrellydw on December 16, 2006, 06:01:44 pm
-
Does anyone know where I can get lights for on the Super 6 Plus 2 dart board? I need 3 lights that go on the board for the "Throw Darts and Don't Throw Darts". There is only one there now the other three holes are empty. I will try to get a picture on here tonight.
-
Here are the pictures, I am only missing one but three don't work.
-
The bulbs are type # 2182-D with the wire leads. Available at just about any amusement game dealer/distributor. Look in your local Yellow Pages telephone directory under the heading of "Amusement Devices".
BTW, these bulbs go into the black plastic sockets and you have to wrap the copper bulb leads exactly like the old bulb did to make proper contact. The sockets come out of the board with a small straight slot screwdriver. Give the socket a slight turn to loosen it. Do this with the power off too or your screwdriver tip will short circuit the bulb leads and blow the lamp driver circuit.
-
Do they come with the sockets? Any place I can order these online, HAPP, Betson, PartExpress?? How hard is it to wrap the leads? Thanks Ken, you have been a great help
-
Happ Controls:
# 91-2182-10 Lamp, 2182-d with wire leads
--or--
# 27030 Lamp & Socket, 2182-d (assembled ready to use)
By the way, the player change and game select button lamps use type 658 bulbs (Happ # 91-0658-00)
-
Thanks Ken, you are the man. Find me that upgrade kit yet :laugh2: