Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Texasmame on November 21, 2006, 10:59:15 pm
-
What say, ladies and germs?
-
I have a Hydra controller I picked up super cheap... Its close but not the same. It scales the Y axis so there is more detail in the middle of the screen... and the springs had a very different feel to them (stronger). I ended up removing the springs and this helped a LOT... Now I want to put a weaker spring without the very very noticable 'center'. I also am looking at how I could change the Y axis so that it would not scale (its not two gears together... but a pipe connected to another).
That was from a really old thread about yokes in general.
-
Also the grips are not the same.
-
Another way to answer this question is: It'll play Star Wars, but it won't feel or look 100% authentic.
-
Or.......
Hydra yoke > Star Wars Yoke
And Sometimes
Hydra yoke < Star Wars Yoke
-
Or.......
Hydra yoke > Star Wars Yoke
And Sometimes
Hydra yoke < Star Wars Yoke
Well there ya go. That clears it right up... ;)
-
Each can be used to play the other, IIRC, but as said above they are not mechanically identical. They have all the same functions on all of the same axes.
-
Kremmit and Chad cleared this up for me. Thanx to all who replied!