Build Your Own Arcade Controls Forum

Front End Support => MaLa Frontend => Topic started by: diverdown on November 18, 2006, 08:55:02 pm

Title: MaLa - Can i alter the "Exit menu"
Post by: diverdown on November 18, 2006, 08:55:02 pm

I would like to know if I can edit the order of the "exit" menu in MaLa.

My issue was highlighted to me because I have an older P1 start button. Sometimes it sticks and sometimes it takes a more solid press to work

To get to the exit menu in mala i press P2 start, navigate to "exit" and hit
P1 start.

Everynow and then (due to me and the button) I double hit the P1 start button. This causes mala to exit to windows. 
To shut down my cab from here I have to open the cab, install a mouse and use it to shut down.


It would make it a whole lot easier for me if "shutdown" was at the top of the exit menu and exit was the next one down


Is this possible?

ta

Title: Re: MaLa - Can i alter the "Exit menu"
Post by: loadman on November 18, 2006, 10:12:38 pm

You could have it set up like mine... See attached pic

I don't use the menu at all.

If I want to shut down the PC I hit P1+P2 then P1 to confirm (or P1+P2 again to cancel)

If I want to exit to windows (where I will need a mouse really) I right click and quit that way..

  ;)