Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: javeryh on November 15, 2006, 11:18:14 am

Title: WTB: Marquee Retainer (Two 20" pieces)
Post by: javeryh on November 15, 2006, 11:18:14 am

Like the one shown here:  http://www.happcontrols.com/amusement/acesor/49100000.htm

I don't need all 10 feet so I was hoping someone had some leftovers they weren't going to use.

Thanks!

Title: Re: WTB: Marquee Retainer (Two 20" pieces)
Post by: Ninten-doh on November 15, 2006, 11:37:10 am

Divemaster sells these (see his thread stickied towards the top of the B/S/T section).

Here's his blurb on the retainers:
HAPP MARQUEE RETAINER $.17 a inch I will custom cut on a cnc machine whatever length you need (49-1000-00 30" Marquee Retainer)

He's a really good guy.  I've purchased retainers along with other stuff from him before.

 :cheers:

Title: Re: WTB: Marquee Retainer (Two 20" pieces)
Post by: mlcampbe on November 17, 2006, 03:56:18 pm

I don't know how hung up you are on a true retainer but you can make one pretty cheaply too. Go to home depot/lowes and get a plastic corner protector that is used to protect wall edges. Look in the wallpaper/blinds area to find it. You can paint this stuff and cut to length and it is only a couple of bucks.