Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: whynotpizza on October 15, 2006, 09:07:41 pm

Title: Coin Door - Plastic 25cent piece
Post by: whynotpizza on October 15, 2006, 09:07:41 pm

Hey guys,

Anyone know where I can get new (or decent condition) 25 cent plastic insert thingee into my over/under coin mech? I need 2 of them. The ones I have are worn and look shabby. These are the plastic pieces which light up with a bulb behind them.

Any pointer would be appreciated.

  :)

   David

Title: Re: Coin Door - Plastic 25cent piece
Post by: SirPeale on October 15, 2006, 09:28:36 pm

What coin door?  There are quite a few, need to narrow it down a bit.

Title: Re: Coin Door - Plastic 25cent piece
Post by: whynotpizza on October 16, 2006, 06:44:54 am

Ok, good point. :)

Attached are some pictures. I have a "Coin Controls Gold Mech Assembly".

Is it easier or better to just buy a whole new assembly? It seems to work.

Or just replace the 25cent plastic things?

Not even sure where to get pieces, parts, assembly for this unit so any pointer would be great.

 
    David

Title: Re: Coin Door - Plastic 25cent piece
Post by: Texasmame on October 16, 2006, 07:54:43 am

Looking for two, also.  Complete with the inserts, if possible.  Coin controls, I believe. . .

Title: Re: Coin Door - Plastic 25cent piece
Post by: NightGod on October 16, 2006, 09:50:54 am

I got mine from divemaster over in the BST listing...

Title: Re: Coin Door - Plastic 25cent piece
Post by: gamecreature on October 16, 2006, 10:16:01 am

Quote from: NightGod on October 16, 2006, 09:50:54 am

I got mine from divemaster over in the BST listing...

Agreed. It's a standard Happs part. Just get the part number and Divemaster will be able to set you up.

BTW, when I had to replace mine, I couldn't find a match for the button, so I bought the button and corresponding bezel. Just took out the old bezel, screwed the new one in and the new button fit like a glove (and looks great, too).

Title: Re: Coin Door - Plastic 25cent piece
Post by: davieboynj on October 16, 2006, 04:46:20 pm

http://cgi.ebay.com/COIN-REJECT-BUTTON-FOR-WELLS-GARDNER-COIN-CONTROLS_W0QQitemZ110007735320QQihZ001QQcategoryZ13718QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

he has the bezels, too.  they are frequently cracked as well.  check that they actually hold the screw. 

http://cgi.ebay.com/ENTRY-BEZEL-FOR-WELLS-GARDNER-COIN-CONTROLS_W0QQitemZ120007587353QQihZ002QQcategoryZ13718QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

Title: Re: Coin Door - Plastic 25cent piece
Post by: gamecreature on October 17, 2006, 09:45:55 am

Here's the part list from Happ's:

http://www.happcontrols.com/cc/42315700.htm

The button is part 891-1113-01

and the bezel is 891-1311-16

I bought mine from Divemaster - he's great.