Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: wildfire123 on September 27, 2006, 12:16:08 am

Title: AVGA + J-PAC TO ARCADE MONITOR PROBLEM
Post by: wildfire123 on September 27, 2006, 12:16:08 am

HI, I am having a hard time figureing this out. All I get on my arcade monitor is a blue and black screen for about 5sec and black out. Its also in split screen. After window logo loads then all I see is black and i was only using my graphic card. When I install my AVGA card same thing happen but when I switch to my pc monitor nothing came up at all. Theres like no signel and I can't even get the chance to install the driver for it. Please help. Thank

Title: Re: AVGA + J-PAC TO ARCADE MONITOR PROBLEM
Post by: RayB on September 27, 2006, 01:13:00 am

Contact Ultimarc.

Title: Re: AVGA + J-PAC TO ARCADE MONITOR PROBLEM
Post by: wildfire123 on September 27, 2006, 04:35:24 pm

i have tried. Will F8 work? My arcade monitor is a Nanao MS9 which is dual-frequency. Where is the jumper so I can set it to 15Khz? If I change the jumper, will it work also? Thanks

Title: Re: AVGA + J-PAC TO ARCADE MONITOR PROBLEM
Post by: RayB on September 27, 2006, 06:34:00 pm

There was a recall on the new AVGA cards. When did you buy yours?

Title: Re: AVGA + J-PAC TO ARCADE MONITOR PROBLEM
Post by: wildfire123 on September 27, 2006, 06:39:03 pm

bought my 2weeks ago, I got the new AVGA2(AGP)

Title: Re: AVGA + J-PAC TO ARCADE MONITOR PROBLEM
Post by: wildfire123 on September 27, 2006, 11:39:11 pm

driver install but screen is still black and white.

Title: Re: AVGA + J-PAC TO ARCADE MONITOR PROBLEM
Post by: Lutus on September 28, 2006, 08:52:51 am

Contact Andy at Ultimarc... seriously, he is very helpful and will probably know exactly what the deal is.