Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: fluxcore on March 20, 2003, 11:22:03 pm
-
Hey there,
I've made a couple of arcade sticks in the past, and recently acquired a dance mat for playstation. Thing is, I want to hack the mat so I can use it on DC and PC.
Of course, the mat itself attaches to the control board via a funky ribbon cable deal, so I can't really just remove the PS controller and solder wires to a universal plug as I do with arcade sticks. Which is a pity, because then I'd have a brilliant PS pad for attaching arcade sticks as well.
Can you forsee any problems if I just add a connector onto the PS control board itself? So that there are effectively two pads being used at once, but only one gets power? I'm thinking this could get a little shady, but thought I'd see what others think.
Cheers,
--flux
-
I may be wrong... as I don't own a playstation nor a DDR mat...
but there are adapters available, that just plug into the joystick end connector that enable playstation pads to work with USB/pc ... there's more than likely one for psx -> DC as well...
I suggest checking outBYOAC console section (http://www.arcadecontrols.com/arcade_alternatives.shtml#console_toc)
looks like there's something called the dreamstation (psx ->DC) and there are probably others...
good luck!
Rampy