Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: smythe on August 18, 2006, 03:21:18 am
-
i have a jamma loom + street fighter 2 jamma cps2
ive hooked everything up joystcks/speakers ect ect
i know jamma has coin 1 & coin 2
but the oin slot has a few wires
any ideas what to hook up & where?
cheers smythe
-
A pic would be helpful if you have one...... to see the wires you mention.
A typical two slot coin mech has two wires, three if each player is coinable.
"coin" and "ground"
If it's illuminated, then there will also be power wires for the bulbs.
(does not come from the jamma harness)
-
ill try to get a pic till then heres what i have
it's like a mars coin accepter + a coin bourd with dip switches ect
theres a red & white wire with psu ( ive hooked up 12v from loom) and it dont like it?
theres then 2 wires with bulb conneted + 4 other seperate wires
on my loom theres a blue & grey with a bulb conneted
some other colourd wires 4 + a black one touch some on these together & ching ching...
i really need to check where they are on the jamma pinout...
my main concern now is why the psu for the coin bourd stops my csp2??
where would i best get power from?
cheers smythe