Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: squirrellydw on August 13, 2006, 10:20:43 am

Title: Molex Microfit 3.0........where can I get these??
Post by: squirrellydw on August 13, 2006, 10:20:43 am

I have been looking for these and I can't find out where to get them.  Can anyone help me find them, a direct link would be great.  Looking for Molex Microfit 3.0 like what Whammocade used.

http://web.tampabay.rr.com/whammoed/whammocade/pics/wiring.jpg

http://web.tampabay.rr.com/whammoed/whammocade/build.htm  look under wire and fans.

Title: Re: Molex Microfit 3.0........where can I get these??
Post by: 2600 on August 13, 2006, 10:39:15 am

Digikey.  Maybe Mouser and others.

You realize that these connectors usually require special crimpers that are expensive?

Title: Re: Molex Microfit 3.0........where can I get these??
Post by: squirrellydw on August 13, 2006, 07:21:51 pm

I couldn't find any

Title: Re: Molex Microfit 3.0........where can I get these??
Post by: whammoed on August 14, 2006, 01:34:42 pm

http://www.mouser.com/catalog/627/1149.pdf

Title: Re: Molex Microfit 3.0........where can I get these??
Post by: squirrellydw on August 14, 2006, 02:35:19 pm

Thanks Whammo, do you know what ones you used?

Title: Re: Molex Microfit 3.0........where can I get these??
Post by: whammoed on August 14, 2006, 03:23:20 pm

Quote from: squirrellydw on August 14, 2006, 02:35:19 pm

Thanks Whammo, do you know what ones you used?

dual row crimp housings, free hanging
they don't seem to show all the sizes for the plugs...

Title: Re: Molex Microfit 3.0........where can I get these??
Post by: squirrellydw on August 14, 2006, 05:07:31 pm

Is that where you got the tool also?

Title: Re: Molex Microfit 3.0........where can I get these??
Post by: whammoed on August 14, 2006, 07:16:43 pm

Quote from: squirrellydw on August 14, 2006, 05:07:31 pm

Is that where you got the tool also?

got the tool for $135 at sager.
www.sager.com

looks like its $150 now
http://smart.sager.com/smart/PRODUCT.ASP?SKU=000000000000578085&pid=U1EFR0EG0WJW8PPRB4RN0UP5TXSP41VF

Title: Re: Molex Microfit 3.0........where can I get these??
Post by: whammoed on August 14, 2006, 07:21:52 pm

I have a set of these too:
http://www.frozencpu.com/slt-16.html
they are generic crimpers and will actually work on the microfit.  They are a little more tedious to use and the actual molex tool will do a better job...but for only $20...

Title: Re: Molex Microfit 3.0........where can I get these??
Post by: squirrellydw on August 14, 2006, 08:11:19 pm

Thanks Whammo