The NEW Build Your Own Arcade Controls

Main => Main Forum => Topic started by: neil324 on August 07, 2006, 05:56:10 pm

Title: Ultimarc pushbuttons
Post by: neil324 on August 07, 2006, 05:56:10 pm

Has anyone used the pushbuttons from ultimarc, what size hole do you need to drill to mount the buttons, have looked on the website is it 28mm, just want to make sure becuase im going to prepare the CP before i order the buttons

Title: Re: Ultimarc pushbuttons
Post by: rbarr110 on August 07, 2006, 06:01:07 pm

I used them for my CP and they are fine. 

The size is 1 1/8" diameter (technically just under: 1 1/8" = 1.125", 25 mm = 1.102")

Title: Re: Ultimarc pushbuttons
Post by: destructor on August 08, 2006, 07:15:58 am

It's standard size as Happ, X-Arcade pushbuttons. Maybe first order buttons and next drill holes?
Hole should be 28-29mm.

Something in Polish language:
http://www.kowal.itcom.pl/ArcadeParts_pliki/PSL.htm

Title: Re: Ultimarc pushbuttons
Post by: TyrannosaurusRox on August 08, 2006, 08:20:00 am

I've ordered a couple of buttons from there in the past and a 28mm spade bit makes the holes just fine...

Title: Re: Ultimarc pushbuttons
Post by: destructor on August 08, 2006, 09:02:51 am

Buttons have about 27,7mm.

Title: Re: Ultimarc pushbuttons
Post by: neil324 on August 08, 2006, 02:18:33 pm

OK thanks all 28mm it is.