Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: squire on August 06, 2006, 05:46:54 pm

Title: angled metal
Post by: squire on August 06, 2006, 05:46:54 pm

please with me ill try to explain this the best i can,
im looking for a piece of angeled metal for my cabinet.
something like this...but i did more of a angle on it..
(http://www.thesafetyrailsource.com/Big%20Yellow%20Guard%20Rail%20files/Big%20Ye1.jpg)
any ideas or recommends?

thanks so much
 where can i get something to this sort? i tryed home depot but only 90 degree pieces...

Title: Re: angled metal
Post by: Hoopz on August 06, 2006, 07:44:02 pm

You can buy a piece of angle iron that you saw at Home Depot and bend it to the angle you need.  I pair of plyers, vice grips etc will do the trick.  It's fairly cheap so it may be the an easy and cheap way to see if it will work or not for what you need.