Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: kiddk1 on July 28, 2006, 10:58:57 pm

Title: LCD topgun Help
Post by: kiddk1 on July 28, 2006, 10:58:57 pm

I just got the http://www.hkems.com/product/xbox/LCDTopGun.htm (http://www.hkems.com/product/xbox/LCDTopGun.htm)  afew days ago and have been messing with it to try and get it up and running but am having a hell of a time.  I installed the drivers and got the pc to recognize the gun but my problem is with the calibration.  I calibrated it(i think) the problem is when I play a lightgun game such as area 51 the target cursor does not move, it will move with the trackball but not my gun, so when I fire nothing happens.  any advice.  I did enable lightgun by changing value to 1 in mame.ini.  My cab is an old birdie king 2 cab so the screen is not perpendicular to the ground.  thanks

Title: Re: LCD topgun Help
Post by: NightGod on July 28, 2006, 11:13:41 pm

No clue on the problem, unfortunately, but just curious what they cost through that site and how long they took to arrive.

Title: Re: LCD topgun Help
Post by: kiddk1 on July 29, 2006, 09:14:43 am

I bought it thru lik sang, about 50.00 shipped and it took about 9 days to arrive.

Title: Re: LCD topgun Help
Post by: NightGod on July 29, 2006, 12:56:25 pm

Cool, roughly the same price as cliffracer, though a bit slower coming from overseas, of course. Then again, CR was down for a while there, too and I'm betting Lik Sang wasn't heh.

Title: Re: LCD topgun Help
Post by: kiddk1 on July 29, 2006, 11:02:45 pm

got it working now, I had to position the led's verticallay